• Step 1: Locate the holes underneath the turf and then find the center of the cup using your thumb. Cut a small X in the center using a sharp utility knife.
• Step 2: Insert the knife into the X and carefully cut until you reach the edge of the cup. Gently hold the turf up at the X and cut tightly around the outside edge of the cup.
• Step 3: Once the turf is removed over the cup, carefully remove the cup from the hole. You may need to use the handle end of a pair of pliers and a screwdriver to pry the cup loose before pulling it out if it does not come out on its own.
• Step 4: Have a 5 gallon bucket nearby for garbage and remove the wax paper from the cups and discard the paper. Make sure the bottom of the hole does not have any concrete in it. Using a small amount of dirt from the bottom of the hole, rub it on the inside walls of the concreted hole.
• Step 5: Reinstall the cup in the hole, ensuring the top of the cup is about 1/8” below the top of the turf. You may need to gently tap the cup into place with the handle of a hammer. Repeat for all of the cups.

INSTALL AWAY……YOUR GOLF GAME IS SAFE WITH US !!